TES-3050 TRMS AC/DC Clamp Meter

EN61010-1
600V INSTALLATION VAT III
POLLUTION DEGREE 2

  • 3-3/4 Digital LCD with bar-graph
  • Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode
  • Zero Adjustment/Relative Reading

 
 

A: General Measurement

Voltage (AC/DC)
Range DC-400mV/4V/40V/400V/1000V
AC-4V/40V/400V/750V
Accuracy DC - 0.75% rdg + 2dgts
AC - 1.2% rdg + 5dgts
Resolution 0.1mV (DC); 0.001V (AC)
Input Impendence 11M £[
Overload Protection DC 1100V & AC 800V
Current (AC/DC)
Range 400/1000A
Accuracy 2% rdg + 10dgts
Resolution 0.1A
Overload Protection 1100A
Continuity Beeper
Sound Level below 40 W
Max Open Circuit Voltage 0.5V
Diode Resolution 0.001V
Accuracy 1% rdg + 2dgts
Ohms (Resistance)
Range 400 £[ /4K£[ /40K£[ /400K£[ /4M £[ /40M £[
Accuracy 1% rdg +3dgts
Resolution 0.1£[
Accuracy 1% rdg + 2dgts
Overload Protection 600Vrms
(Also for continuity & Diode)
Max open Circurit Voltage 0.5V
Frequency (Hz)
Range 100Hz/1KHz/10KHz/100KHz/800KHz
Accuracy 0.1% rdg + 2dgts
Resolution 0.01Hz
Max Input Sensitivity 100mV
Overload Protection 600Vrms

B. Peak Hold Measurement

Current (AC)
Range 400/1000A
Accuracy 2.5% rdg + 10dgts
Resolution 0.1A
Overload Protection 1100A
Voltage (AC)
Range 4V/40V/400V/750V
Accuracy 2.5% rdg + 10 dgts
Resolution 0.001V
Input Impedance 11M £[
Overload Protection DC 1100V & AC 800V
Numerical Display 3 3/4 digit liquid crystal display (LCD) maximum reading 3999
Sampling Rate 20 times/sec (Bargraph )
2 times/sec (Digital Display)
Power Source one 006p 9V or IEC 6F22 or NEDA
1604 Battery
Dimensions 239(L) x 66(W) x 34(H) mm
Weight Approx. 365g

 
TES Electrical Electronic Corp.
  • Office: 7F, No. 31, Lane 513, Rui Guang Road, Neihu Dist., Taipei, Taiwan, R.O.C.
  • TEL:886-2-2799-3660 FAX:886-2-2799-5099
  • E-Mail: tes@ms9.hinet.net